BDGQX - 781-500, URETHANE ENAMEL, INSIGNIA WHITE
- MSDS: BDGQX
- Manufacturer: AMERON INDUSTRIAL COATINGS DIV
- Product Name: 781-500, URETHANE ENAMEL, INSIGNIA WHITE
- National Stock Number: 8010-00-181-8171
Product Identification
Product ID:781-500, URETHANE ENAMEL, INSIGNIA WHITE
MSDS Date:01/01/1985
FSC:8010
NIIN:00-181-8171
Kit Part:Y
MSDS Number: BDGQX
Responsible Party
BREA, CA 92621-3904
US
Emergency Phone: 714-529-4597
Info Phone: 714-529-4597
Cage: 09869
Contractor
Telephone: 714-529-4597
Cage: 09869
Ingredients
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 54.7%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 7.0%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 23.3%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 15.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:INHAL:ANESTHTC,IRRIT OF RESP TRCT,ACUTE CNS
DEPR-HDACHE,DIZ,STAG,CNFSN,UNCON,COMA.EYE&SKIN:PRIM IRIT
First Aid
First Aid:SKIN:FLUSH WITH PLENTY OF WATER WHILE REMOVING CONTAMINATED
CLOTHING. EYES:IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MIN.
INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, CALL A PHYSICIAN.
Fire Fighting
Flash Point:24F TCC
Lower Limits:1.3
Extinguishing Media:SMLL FIRES-CO*2,DRY CHEM,LGE FIRES-POLYMER FOAM STD
APPL RTE
Fire Fighting Procedures:SELF-CONTAINE BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODED DUE TO
PRESSURE BUILD-UP WHEN EXPOSED TO HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFS, SPARKS). AVOID BREATHING VAPORS. VENTILATE AREA. REMOVE WITH
INERT ABSORBENT AND NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED&PROTECTED FOR STORAGE OF NFPA CLASS 1
FLAMMABLE (OR COMBUSTIBLE) LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. CONTAINERS SHOULD BE GROUNDED
WHEN POURING.AVOID FREE FALL OF LIQ.IN EXCESS OF A FEW INCHES.DO
NOT FLAME CUT,BRAZE,OR WELD COATED MTRLW/O APPR.RESP.ADD LABEL
WARNING!
Exposure Controls
Respiratory Protection:OPEN-CHEM/MECH FLTR
RESP,REST.VENT-CHEM.MECH.FLTR,CNFND-AIRLNE RESP
Ventilation:GEN.DLTN OR LOCAL TO KEEP BLW TLV&REMOVE DECOMP PRODS.
Protective Gloves:PRTD/PRLNGD CON
Eye Protection:PRTCT AGNST SPLSH SFY EWR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
PART A OF A TWO PART PRODUCT. SEE P/N INDICATOR B;781-700,UNDER SAME
NSN. PRODUCT CONFORMS TO MIL-C-81773(AS), TYPE I. WT PER
GALLON:11.1 LBS.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:158 TO 329F
Vapor Density:>1
Evaporation Rate & Reference:SLOWR THAN ETHER
Percent Volatiles by Volume:57.8
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT, AND HOT SURFACES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, &
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.